Bunyan Solb
Bunyan Solb is one of the largest steel manufacturers in GCC.Located in Al Kharj, Riyadh, KSA, Bunya...
Welcome to Bunyan Solb's website and thank you for your interest.
Bunyan Solb is one of the largest steel manufacturers in GCC.Located in Al Kharj, Riyadh, KSA, Bunya...
Drawing-grade wire rods are used by downstream industries to produce mesh, wire meshes, binding wires, etc. They are used for the downstream cold indentation process to make cold-deformed bars for construction.
Bunyan produces a range of high and medium-carbon steel wire rods according to international standards for various applications. Concrete-reinforcing bars in coil meeting SASO ASTM A615, BS 4449, and GCC standard GSO6 requirements are also available.
Round coils can be used for a wide range of applications, including wire products, springs, fasteners, and construction materials. It also offers flexibility in terms of shaping and forming into various components.
Round Coils
Diameter Range: 5.0mm to 12mm (plain)
Our capacity is over 200,000 MT per year.
Chemical composition and mechanical prosperities of drawing grade wire rods
Grade Properties | Chemical Composition% | Tensile Strength MPa | Elongation% per min | ||||
|---|---|---|---|---|---|---|---|
C | SI | Mn | P | S | |||
AISI 1006 | 0.08 max | 0.1 max | 0.45 max | 0.04 max | 0.05 max | 330-430 | 20 |
AISI 1008 | 0.1 max | 0.08 – 0.13 | 0.30 – 0.50 | 0.04 max | 0.05 max | 350-440 | 20 |
AISI 1010 | 0.08-0.13 | 0.10 – 0.15 | 0.30 – 0.60 | 0.04 max | 0.05 max | 360-450 | 20 |
AISI 1015 | 0.10-0.15 | 0.10 – 0.15 | 0.30 – 0.60 | 0.04 max | 0.05 max | 370-460 | 20 |
TOLERANCES AND COIL DIMENSIONS
Size tolerances for coiled Products
Type | Size Range in mm | Size Tolerance in mm | Ovality in mm max |
|---|---|---|---|
Plain drawing Grades | 5.5 and 6.5 & 7-16 | +/- 0.25 / +/- 0.30 | 0.40 to 0.48 |
Plain Mesh Grades | 5-5, 6-5 & 7-16 | +/- 0.30 / +/-0.40 | 0.48 to 0.64 |
Deformed | 8,10,12,14 and 16 | Mass tolerance as per applicable standards. | |
Rebar Coils & Plain Wire Road Specifications
Process Route followed:
Up to 100% DRI
*Up to 40% recycled scrap but for general quality products
Coil Dimensions | Physical Conditions and Prosperities |
|---|---|
· Size range: 5.5-16mm · Outside coil diameter: 1200 - 1250 mm · Inside coil diameter: 850 mm · Coil length: 1600 - 1750 mm · Coil weight: 2050 Kg | · Coil free from harmful surface defects. The maximum depth of surface defects is 1.0% max of wire rod diameter. · Microstructure: Predominantly fine-grained Ferrite. · Micro Inclusions: Max level 2.0 (both thin and thick series) as per ASTM A-45. · Grain size 9-12 as per ASTM A- 11 |
To be the fastest growing Steel Manufacturing Company within the Middle East and be the Market leader.
2024 © Bunyan Solb